• The two machine sizes specified in the name by the maximum machining diameter (180 mm or 280 mm) allow for high productivity including right spindle machining
• Five technological versions for each machine size allow for the perfect choice of your technology from small-scale production to specialized mass production.
• The solid base of the machine and the bed ensure high stiffness of the machine
• Deformations of mechanical components of machines are verified using numerical calculation methods – FEM
• Dynamics and stability of the axle movement are checked using modern calculation methods
• Spindle units provide high machining efficiency
• The built-in spindle synchronous motors provide high spindle dynamics and efficient rotary C axis
• Line axle support, right headstock or tailstock travels on the track guide, providing high positioning accuracy and interpolated axle movement.
• The rigidity of the three-axial version of the upper slide emphasizes the solution with the virtual motion of the Y1 axis, which consists of the interpolation of the real axes X1 and Y ‚including the angle of 30 degrees
• Programmable movement of the tailstock body reduces unnecessary tampering in the machining process
• The choice of modern control systems GE FANUC 0i guarantee excellent control and programming comfort.
• Machines meet your expectations in terms of ease of use, including integrated workshop programming

It is a lathe machine intended to single-part and short-run production. With these machines it is possible to shape components of shaft or flange character from pieces or of the bar material drawn, pared or grounded. It is also possible to shape outer and inner surfaces cylindric, conic and spheric, the machines can drill, ream and cut threads in arbor axis or out of it. These machines are powered.

Solid, heavily ribbed, cast iron construction giving exceptional rigidity and stability

It is a multi-purpose lathe intended to single-part, short-run and duplicate production of presice components of bar material drawn, pared or grounded up to 50 mm diameter,  and of ganges up to 270 mm diameter and shafts up to 535 mm length.

These are digitally controlled lathe semi-automativ machines intended to shape intricately shaped shaft or flange components in short-run or single-part production. Apart from shaping the machine can also drill and shape slots and cut surface and inner threads.

This is highly productive mechanic hydraulically controlled two-pillar band saw with multiple material feeding. The saw is intended to part material in vertical cuts. The saw has extremely sturdy construction and especially an arm sloping in 25°. These features combined with efficient planetary drive and 41 mm tall saw belt guarantee maximal possible capacity of the machine.
The length and the number of pieces are set in control panel.  The machine itself chooses the number of feedings and it makes necessary calculations. The system allows setting of 9 programs for quick length adjusting, eventually the option of mechanic format change for parting several stoce from one bar. The saw allows choice between mechanic and semi-mechanic mode where all the movement is controlled independently.
It can be applied in duplicate production in industrial functioning and because of its sturdy construction it allows parting of wide range of material quality including stainless steel, tool steel, especially of full diameter.

Requested length of parted material is set very easily with hand crank with depiction on digital register. There are two cutting speeds of 40 a 80 m/min.

It is used for cutting parts from steel, cast iron and stainless metals, for cutting full materials and hollow profiles, for cutting dents and for right-angeled and salope cuttings up to 30°, or as the case may be 45°.